Technical Parameter

The GE DS200PCCAG1ACB is a key component in General Electric’s (GE) Mark V control system series. Its primary function is to serve as an interface between the driver control circuit and the SCR (Silicon Controlled Rectifier) power bridge. The module transmits signals via a pulse transformer, ensuring precise control and power signal transmission.

Product Type and Functions:

Power Distribution: The DS200PCCAG1ACB is responsible for distributing input DC power across various modules in the system, such as controllers, drivers, protection devices, and actuators.
Signal Conversion: This module converts digital signals into analog signals to drive control signals. It also supports the transfer of gate signals to the SCR bridge via the pulse transformer, ensuring accurate signal transmission.
Protection Features: The module is equipped with overcurrent, overvoltage, and short-circuit protection to ensure the safe operation of the system.
Modular Design: The modular design facilitates easy installation and maintenance, as well as quick replacement to minimize downtime.

Technical Specifications and Applications:

Input Voltage: Typically 24V DC, though other versions support higher voltages, such as 125V DC.
Output Current: The typical output current is 10A, with certain models supporting higher currents, ranging from 100A to 400A.
Operating Temperature Range: Typically from -40°C to +70°C, with some versions supporting a wider range, from -40°C to +100°C.
Dimensions: The standard dimensions are 16cm x 12cm x 16cm, with a weight of 0.8kg.
Applications: Widely used in industrial automation, power systems, turbine generators, the oil and gas industry, and other industrial environments that require high reliability and precise control.

Installation and Maintenance:

When installing, ensure compatibility between the module and the system to avoid issues like overheating or system failure.
Before replacement, it is recommended to check the diagnostic information of the driver to determine if there are any defects or maintenance needs.
The module does not include fuses, indicator lights, or test points, but fault troubleshooting and configuration can be performed using jumpers.

Other Features:

Fuse-less Design: The module’s fuse-less design enhances system reliability and safety.
Communication Protocol Support: The module supports various communication protocols, such as Modbus and Ethernet, facilitating integration with other devices.

The DS200PCCAG1ACB is a high-performance, reliable industrial control power connection card that is crucial for applications requiring precise control and high reliability in industrial automation. Its modular design and flexible configuration options make it an indispensable part of the Mark V control system.

Annual hot selling advantage products：

ABB PM665、ABB S-073N、ABB S-123H 3BHB030479R0512

First hand source, affordable price. Spot inventory!

•Shipping Port: Xiamen

•Ship to you via Fedex/DHL/TNT/UPS/EMS

•Package: Original packing with cartons

GE 281B7946G1301	GE DS3800HPBC1A1B
GE DS3800DGTA1C1D	GE DS200TCQCG1AJD
GE DS3800DMPK1e1d	GE IS200BCAAH1ABA
GE DS3800HCIC1E1E	GE DS3800NFDB1A1A
GE DS3800HMPK1J1H	GE IS200EMIOH1ACA
GE DS3800XTFP1E1C	GE IS200EMIOH1A
GE DS3800NB1F1B1A	GE IS200JPDHG1AAA
GE DS3800HPIB	GE IS200JPDMG1AAA
GE DS3800DFXA1B1C	GE DS3800NPCM1B1B

Our Main Brands

DCS/PLC/TSI Manufacturers:
ABB, GE, Allen Bradley, Honeywell, Emerson, Bently Nevada, Prosoft, Siemens, Westinghouse, Triconex, Foxboro, ICS Triplex, Hima, Schneider, Yokogawa, Woodward, B&R, KEBA, etc.

Product Categories & Models

1. Distributed Control System (DCS)

ABB:3AUA0000110429, SYSCON2 746924
Invensys Foxboro:FBM214, FBM242, B0123HE
Invensys Triconex:3625, 3700A, 3604E
Woodward:5462-758B
HIMA:F2-DO-16-02, F8650E
Yokogawa:SAI143-S03 S1, F9342L-02
Honeywell:51402497-200, 51403519-160, 51199194-100, CC-PDO801
Emerson:KJ4001X1-NB1, 12P3368X012

2. Programmable Logic Controller (PLC)

Rockwell/Allen Bradley:1734-IB8, 1734-OB8, 1769-L18ER-BB1B, 1756-IM16I
ICS Triplex:T8461, T8850, T8403, T8431, T8831, T8310
Schneider Modicon:140DDI85300
GE Fanuc:IS210AEPSG2B, IS220UCSAH1A, IS215ACLEH1A, IS210AEAAH1B
Siemens:6ES7331-1KF02-0AB0
Prosoft:MVI46-DFNT
Bachmann:MPC240
Woodhead:9905-068 2301A

3. Turbine Supervisory Instrumentation (TSI)

Bently Nevada:3500/22M, 138607-01, 3500/25, 3500/53, 3500/32M 149986-02
EPRO:MMS6110, MMS6120, MMS6220, MMS6312, MMS6410, 6423, 6424
ENTEK:EK C6622HS, XM124, 1440-SDM02-01RA

About GE:

1. The Mark VIe Control PPDA Power Distribution System Feedback Module, Cat.No. IS220PPDAH1Ais intended to be used with accessory control power distribution board Cat. No. IS200JPDSG1A.

2. Mark Vle Controller, Cat Nos.IS220UCSAH1A,IS420UCSBH1A, IS420UCSBH3A, IS420UCSBH4A, IS421UCSBH1A,IS421UCSBH4A and IS420PPNGH1A.

3. Mark VleS Safety Controller, Cat No. IS420UCSBS1A, IS421UCSBS1A.

4. The Mark Vle Control HART Enabled I/O Module, Cat No. IS220PHRAH1A is intended to be used with accessory terminal board Cat.Nos. IS200SHRAH1A, IS200SHRAH2A.

5. The Mark VleS Control HART Enabled I/O Module, Cat No. IS220YHRAS1A is intended to be used with accessory terminal board Cat.Nos. IS200SHRAS1A, IS200SHRAS2A.

6. The Mark VIe Control PTUR Turbine Specific Primary Trip, Cat. No. IS220PTURH1A is intended to be used with accessory terminal board Cat. No. IS200TRPAH1A.

7. The Mark VIe Control YTUR Turbine Specific Primary Trip, Cat. No. IS220YTURS1Ais intended to be used with accessory terminal board Cat. Nos. IS200TRPAS1A. Cat. No. IS220YTURS1A with RoHS-compliant internal boards IS400BTURS1A and IS400KTURS1A is intended to be used with accessory terminal board Cat. Nos. IS200TRPAS1A.

8. The Mark VIe Control PPRO Backup Turbine Protection, Cat. Nos. IS220PPROH1A is intended to be used with accessory terminal board Cat. Nos. IS200TREAH1A, IS200TREAH3A, IS200SPROH1A, IS200SPROH2A, IS200TPROH1C, IS200TPROH2C.

9. The Mark VIe Control YPRO Backup Turbine Protection, Cat. Nos. IS220YPROS1A is intended to be used with accessory terminal board Cat. Nos. IS200TREAS1A, IS200SPROS1A, IS200TPROS1C, IS200TPROS2C.

10. The Mark VIe Control PAMC Acoustic Monitoring Input Module, Cat. No. IS210BAPAH1A is intended to be used with accessory terminal board Cat. No. IS210SAMBH1A